Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service Reset on a Skoda Octavia 3

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

This brief video tutorial shows all the necessary steps to perform a service reset on a third-generation Skoda Octavia, produced from 2012 to 2019. This operation is very simple and can be done independently in just a few seconds after servicing the vehicle.

Let's see the procedure.

First, press and hold the central "0.0/SET" button located on the speedometer, then turn on the vehicle's ignition. Once done, the display will show a request to perform the reset, so to confirm, release the button and press it again.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Skoda Octavia II
How to reset the service light on the Skoda Octavia II
Skoda Octavia (2004-2012 / 1Z, MK 2) Today we will see how to reset the service light of a vehicle produced from 2003 to 2013 Skoda Octavia. To perform the reset, we must access the serv…
Resetting the Inspection Warning on the Skoda Octavia
Resetting the Inspection Warning on the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) In this brief guide, you will find step-by-step instructions that will allow you to reset the service light for the routine maintenance oil change on…
Reset of the engine oil change warning (service) for the Skoda Octavia.
Reset of the engine oil change warning (service) for the Skoda Octavia.
Skoda Octavia (2012-2019 / 5E, MK 3) The procedure outlined in this guide will show us how to reset the engine oil change warning (service) on the Skoda Octavia. First, let's get inside …

    Frequently Asked Questions

    • Octavia 2012-2019 - What does the p171900 fault code on the Skoda Octavia mean? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos