Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Inspection Warning on the Skoda Octavia

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: Service warning light

In this brief guide, you will find step-by-step instructions that will allow you to reset the service light for the routine maintenance oil change on the Skoda Octavia, using the VCDS software. Get inside the vehicle and start by connecting your diagnostic tool to the OBD port of the vehicle, turning on the instrument panel; then follow the guided procedure to confirm and execute the reset of the maintenance light and service, later verifying on the central display that the oil life counters have been completely reset.

Posted on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the inspection warning on the Skoda Octavia from the instrument panel.
How to reset the inspection warning on the Skoda Octavia from the instrument panel.
Skoda Octavia (2012-2019 / MK 3, 5E) To reset the inspection warning on the Skoda Octavia, get into the car and turn the ignition to the "on" position with the engine off. On the instrum…
Reset the Skoda Octavia inspection service reminder.
Reset the Skoda Octavia inspection service reminder.
Skoda Octavia (2004-2012 / MK 2, 1Z) The following steps will show us how to reset the maintenance service light for the engine oil change of the Skoda Octavia. First, we get into the ca…
How to reset the AdBlue top-up warning on the Skoda Octavia
How to reset the AdBlue top-up warning on the Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) In this short guide, we will see how to reset the refill warning of the AdBlue liquid in the Skoda Octavia; by turning on the instrument panel, we wi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos