Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulbs on a Skoda Yeti

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: License plate light

In this video tutorial, you will learn how to remove and replace the number plate bulbs on a Skoda Yeti. First, move to the rear of your car and open the tailgate; then pry off the side to remove the number plate light cover, as shown in the video. Next, disconnect the electrical connector from the bulb, replacing the small bulb with a new one (in this case, a new LED light is installed); refit the light cover and secure it properly!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the 2011 Skoda Yeti
How to replace the rear headlight bulbs of the 2011 Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Today we will explain how to replace the rear headlight bulbs of the 2011 Skoda Yeti. We open the tailgate and unscrew the two Torx screws using a T …
Replacement of the front headlight bulb of the Skoda Yeti
Replacement of the front headlight bulb of the Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Let's see the information that will allow us to disassemble and replace the headlight bulb of the Skoda Yeti. First, open the hood of the car and sta…
How to Replace the Rear Light Bulbs in the Skoda Yeti?
How to Replace the Rear Light Bulbs in the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this tutorial, we will see how to replace the rear light bulbs in the Skoda Yeti, a very simple and quick operation. First, ensure that the instru…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos