Do it yourself
| ||||
|
Skoda Rapid - Video tutorial
Model: Skoda Rapid
MK 1
- Years 2012-2019 In order to reset the Service indicator of the Škoda Rapid, you need to press and hold the 0.0/SET button located in the bottom center of the instrument panel. While holding this button, you can insert the ignition key into the corresponding slot and then turn it to start the instrument panel. Once it is turned on, you can release the button and then press it again; this will ensure that the Service indicator is completely gone from the instrument panel, which can now be turned off.
Posted on 18 July 2023 by ScegliAuto
Other guides that may interest you |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |