Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Skoda Fabia 2

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

In this brief guide, you will see the entire procedure necessary to reset the service light, which indicates the remaining life of the engine oil, on a Skoda Fabia, second generation model produced from 2007 to 2014. Start by pressing and holding the trip button "0.0" located on the right of the speedometer, then turn on the vehicle's ignition without starting the engine.

Once done, release the "0.0" button and immediately press the button on the left of the speedometer to execute and complete the reset.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Skoda Fabia
Resetting the Service Light on a Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Below are the instructions on how to reset the maintenance warning light on the Skoda Fabia. First, get into the vehicle and turn on the ignition. Th…
How to Reset the Service Light on the Skoda Fabia
How to Reset the Service Light on the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) This video tutorial shows the simple and quick procedure to reset the service light on the Skoda Fabia if the service light has not turned off after …
How to reset the service light on the Skoda Fabia
How to reset the service light on the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) If you want to carry out the procedure through which you can reset the service light of your Skoda Fabia by yourself, all you have to do is follow th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos