Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : To reset the service light on the Skoda Fabia.

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Instrument cluster
Operation: To reset the service light on the Skoda Fabia.

If you want to correctly reset the service light on your Skoda Fabia, all you have to do is read the following guide and follow all the steps described. It is a rather simple procedure that will only take you a few seconds to complete. First of all, reach the driver's seat and, with the instrument panel completely off, locate and hold down the "0.0" button located below the display. At the same time, turn on the instrument panel and wait for the manual reset of the service light to be completed. Finally, release the button and turn off the instrument panel.


Posted on 26 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Fabia 2014-2021 - What to do if the tire pressure light came on on your Skoda Fabia? Read Answer
    • Fabia 2007-2014 - What are the red warning lights on the dashboard of the Skoda Fabia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos