Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the Smart Fortwo car radio

Model: Smart Smart 450 - Years 1998-2007
Part: Car stereo

In the following guide addressed to all of you who own a Smart Fortwo, we will describe all the necessary steps to easily remove the factory radio. First of all, enter the passenger compartment and turn off the car if it is still on, then pull towards you the control panel located in the lower area of the radio. Once you have done this, disconnect the electrical cable and unscrew the screw with a crosshead screwdriver. Next, remove the entire plastic panel and unscrew the screws holding the radio in place. Finally, pull towards you the radio and complete the removal.

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove the Radio from a Smart Fortwo
Remove the Radio from a Smart Fortwo
Smart (1998-2007 / 450) Want to remove the radio from a Smart Fortwo? Remove the radio and install a new one. Use the original or aftermarket metal keys to remove the radio …
Removing the Radio from Smart Fortwo
Removing the Radio from Smart Fortwo
Smart (2014-2022 / 453) Use a plastic trim tool to remove the button panel at the back of the radio. With a screwdriver, unscrew the screws located in the dashboard slot. No…
How to Remove the Radio from a Smart ForTwo
How to Remove the Radio from a Smart ForTwo
Smart (1998-2007 / 450) Before you begin, sit in the driver's seat of your Smart ForTwo. Start by unclipping and moving the button panel located below the radio. This will r…

    Frequently Asked Questions

    • Smart 2004-2006 - How do you unlock the radio on the Smart Fortwo? Read answer

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos