Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Fog Lights with Bulb on a Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fog lights

In this video, see how to install the fog light with bulb on a Smart Fortwo. Install the new bulb in the side fog light, position it in the front frame of the car, and screw in the fastening screws with the appropriate screwdriver (connect the power connector). Once the fog light is installed, proceed with the other one, installing the new bulb here as well (same size and voltage). Install the fog light in the frame following the previously described procedure. Test the correct operation of the lights and finally reattach the covering bumper.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the fog lights on Smart Fortwo
Smart (2014-2022 / 453) Let's see how to remove the fog lights of the Smart Fortwo. We lift the car onto a jack and disassemble the front wheel in conjunction with the front…
How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…
How to replace the headlight bulb on a Smart ForTwo
How to replace the headlight bulb on a Smart ForTwo
Smart (1998-2007 / 450) Let's start by unhooking the two lower hooks that secure the front cover of our Smart ForTwo, and then disengage and remove the cover itself. By doin…

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos