Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Smart ForTwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight bulb

See other generations:
Video tutorial

Start by releasing the two lower clips that secure the front cover of your Smart ForTwo, then unclip and remove the cover. This will give you access to the rear of the bulb.

Next, rotate the holder of the position light to extract it. At this point, disconnect the bulb from its holder, and you will have successfully completed the disassembly. To fit the new bulb and reassemble everything, simply follow these steps in reverse, and you will have finished the replacement.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …
How to Change the Headlight Bulb of the Smart Fortwo
How to Change the Headlight Bulb of the Smart Fortwo
Smart (2007-2015 / 451) In this tutorial video, learn how to remove and replace the headlight bulb of the Smart Fortwo in simple and quick steps. First, remove the upper pan…
How to Replace the Front Headlamp Bulb on Smart Fortwo 451
How to Replace the Front Headlamp Bulb on Smart Fortwo 451
Smart (2007-2015 / 451) In today’s video, see how to remove and replace the front headlamp bulb on a Smart Fortwo 451, following the instructions below. First, remove the fr…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos