Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Lights on a Smart

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

See other generations:
Video tutorial

In today's video, you will learn how to replace the bulb of the fog lights on the Smart 451. First, park the vehicle on a level surface and engage the handbrake. Allow the car to cool down for safer working conditions.

Now, lean down and remove the plastic trim surrounding the lights. Next, remove the fixing screws and proceed to extract the cover.

Disconnect the power connector and remove the blown bulb. Replace it with a new bulb of the same type (H1) and then reassemble everything by following the previous steps.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Fog Lights on Smart Fortwo
Smart (2014-2022 / 453) Let's see how to remove the fog lights from the Smart Fortwo. Lift the car on a jack and remove the front wheel alongside the front fog light. Remove…
How to Install Fog Lights with Bulb on a Smart Fortwo
How to Install Fog Lights with Bulb on a Smart Fortwo
Smart (2007-2015 / 451) In this video, see how to install the fog light with bulb on a Smart Fortwo. Install the new bulb in the side fog light, position it in the front fra…
Where to Find the Air Conditioning Recharge Valves on the Smart 450
Where to Find the Air Conditioning Recharge Valves on the Smart 450
Smart (1998-2007 / 450) If activating the air conditioning does not engage the compressor or the air from the vents is not cold enough, it means there is insufficient gas in…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos