Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Light Bulb in a Smart 451

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Interior dome light bulb

See other generations:
Video tutorial

Replacing the interior light bulb is very simple and does not require special precautions: the light unit is clipped into its support; it is sufficient to lever around the edge to release it (it is recommended to use a plastic lever or apply tape to the tip of a screwdriver); once the light unit is released, disconnect the power connector and complete the disassembly; at this point, simply remove the old bulb from the holder and install the new one, then reverse the steps to reassemble.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Smart Fortwo 450?
How to Replace the Cabin Filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) Replacing the cabin filter in the Smart Fortwo 451 takes about 20 minutes. The filter is located inside the cabin, near the accelerator pedal. To cha…
How to Replace the Front Headlamp Bulb on a Smart 451
How to Replace the Front Headlamp Bulb on a Smart 451
Smart (2007-2015 / 451) To replace the front headlamp bulb on a Smart 451, open the bonnet to access the rear of the headlamp. Remove the circular cover that protects the co…
How do you replace the front headlight bulb in the Smart Fortwo 451?
How do you replace the front headlight bulb in the Smart Fortwo 451?
Smart (2007-2015 / 451) Replacing a headlight bulb on the Smart Fortwo 451 does not necessarily require going to a workshop, as it only takes a few minutes for the job to be…

Replacing the Gear Knob on the Renault Espace

The following steps will show you how to remove and replace the gear knob of the manual gearbox on the Renault Espace. First, get in the vehicle and start by removing the small upper cover of the knob; to remove it, simply pull the gear knob upwards with force to detach it from the lever, as shown in the video. At this point, remove and replace the gear gaiter if necessary, installing the new one; finally, insert the new gear knob, securing it properly onto the lever (ensure there is no play between the lever and the knob).

Watch the video!


by ScegliAuto

More videos