Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Front bumper

In this tutorial, we can see how to remove the front bumper on the Smart ForTwo, a very simple operation. First, we open both the hood and both doors, then we remove the front strap and remove both indicated plastic covers. Next, we remove all the various fastening rivets along the perimeter of the bumper, unclip the two lower plastic covers, and unscrew both the bolts that have just been released and those along the upper edge. At this point, all that remains is to grab the bumper, separate it from the frame, and install any replacement following the reverse procedure.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of a Smart ForTwo
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the …
How to remove the bumpers (front and rear) of the Smart Fortwo
How to remove the bumpers (front and rear) of the Smart Fortwo
Smart (1998-2007 / 450) The following steps will show us how to disassemble and remove the bumpers (front and rear) of the Smart Fortwo. Let's start by disassembling the rea…
Disassembly of the Smart Fortwo headlight
Disassembly of the Smart Fortwo headlight
Smart (2014-2022 / 453) In this video tutorial we will see how to remove the headlight of a Smart Fortwo and in the meantime we will see how to remove the entire front part …

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos