Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove the front seat of a Smart Fortwo

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Seat
Operation: How to remove the front seat of a Smart Fortwo

Let's see how to remove the front seat of a Smart Fortwo: move the seat back (with the electric buttons if present) and bring the seat up, then unscrew the tightening screws placed on the front rail with a socket wrench. We move the seat forward with the shift buttons and remove the locking pins from the rear of the rail. Finally we disconnect the power supply terminals of the front seat (power supply and airbag) and remove it from the passenger compartment. We assemble the front seat of the car by carrying out the disassembly operations mentioned above.


Posted on 3 November 2023 by ScegliAuto



How to open the front hood of a Smart ForTwo
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo, and then, we will have to head towards the front of the car. So let'
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the
How to adjust the seat of a Smart Fortwo seat
Smart (2014-2022 / 453) Let's see how to adjust the seat of the Smart Fortwo. We open the car door and enter the passenger compartment, then, we move the seat forward if we

    Frequently Asked Questions

    • Smart 2014-2022 - How to unlock the seat of the locked Smart? Read Answer
    • Smart 1998-2007 - How much does it cost to redo the upholstery of a Smart? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos