Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat from a Smart Fortwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Seat

See other generations:
Video tutorial

Removing the front seat from the Smart? Here’s how to disassemble the seat and reassemble it. Open the car door and access the interior. Move the seat back (using the electric buttons if available) and raise the seat base, then unscrew the securing bolts on the front rail with a socket wrench.

Move the seat forward using the adjustment buttons and remove the securing pins from the back of the rail. Disconnect the power connectors for the front seat and remove it from inside the cabin (unscrew the seatbelt bolt).

Fit the new seat onto the sliding rails and screw in the securing bolts.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat from a Smart Fortwo
How to Remove the Front Seat from a Smart Fortwo
Smart (1998-2007 / 450) Here’s how to remove the front seat from a Smart Fortwo: move the seat back (using the electric buttons if available) and raise the seat base, then u…
How to Adjust the Seat of a Smart Fortwo
How to Adjust the Seat of a Smart Fortwo
Smart (2014-2022 / 453) Adjust the seat of the Smart Fortwo. Open the car door and enter the cabin. Move the seat forward to reach the pedals or backward for legroom, using …
How to Remove the Gear Knob from a Smart ForTwo
How to Remove the Gear Knob from a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos