Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How are the headlights of the Smart 453 adjusted?

Model: Smart Smart 453 - Years 2014-2022
Part: Headlight

For the Smart 453, we see a review video attached here. There is a dedicated command to achieve what is mentioned in the subject, located inside the cabin. In addition to this, there is also the possibility to manually adjust the settings of the front headlights using the adjustment screws located at the back of the lights. With these screws, we can make adjustments both vertically and horizontally; we only need to use a screwdriver and nothing more. However, it should be noted that for the best results, it is preferable to position the vehicle with the front facing a white wall.

Posted on 10 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the front bumper and mudguard on Smart Fortwo 453
Removing the front bumper and mudguard on Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial we will see the instructions to be able to remove the front bumper together with the fender, as a whole piece, on a Smart Fort…
How to replace the front turn signal bulb of the Smart Fortwo 453
How to replace the front turn signal bulb of the Smart Fortwo 453
Smart (2014-2022 / 453) If you own a Smart Fortwo 453 and want to replace one of the front turn signal bulbs by yourself, just follow the following guide and apply the descr…
Fuse box diagram of the Smart ForTwo Electric Drive 453
Fuse box diagram of the Smart ForTwo Electric Drive 453
Smart (2014-2022 / 453) The guide shows the layout of the fuse box and the specifications of the protection elements of the Smart ForTwo Electric Drive 453; inside the vehic…

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos