Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cylinder Head on a Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Engine

Here’s how to remove the cylinder head on a Smart Fortwo. Start by removing the rear bumper; take off the metal soundproofing panel covering the engine and pull out the oil dipstick. Disconnect all the connectors supplying electricity to the glow plugs using needle-nose pliers. Remove the various wiring present on the cylinder head (disconnect the metal clips on the various pipes and the power connectors with pliers). Unscrew all the bolts securing the engine with a socket wrench or electric screwdriver; remove it. Reassemble everything in reverse order.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the cylinder head of the Smart Fortwo.
How to disassemble the cylinder head of the Smart Fortwo.
Smart (2007-2015 / 451) To disassemble and replace the cylinder head or its gasket of the Smart Fortwo with a 1.0 petrol engine, it is necessary to remove the engine block f…
Guide to disassembling the cylinder head of the Smart Fortwo 1.0.
Guide to disassembling the cylinder head of the Smart Fortwo 1.0.
Smart (2007-2015 / 451) Let's briefly see in this guide the steps that will allow us to disassemble and replace the engine head of the Smart Fortwo 1.0 gasoline. In order to…
Removing the Spark Plugs on a Smart Fortwo
Smart (1998-2007 / 450) Do you want to remove the spark plugs on a Smart Fortwo? Let's see in this video how to proceed in detail: open the engine compartment (rear), lift t…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos