Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Smart

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

You can completely clear the service light from the instrument panel of the Smart by turning on the ignition, turning the key in the corresponding ignition switch. Once the ignition is on, press and hold the button located at the top left.

This will cause the service light on the instrument panel to start flashing until it turns off completely; once the service light has been deactivated, you can switch off the instrument panel. When you turn it on again, you will notice that the light does not appear on the display.


Posted on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Smart Fortwo
How to Reset the Service Light on a Smart Fortwo
Smart (2007-2015 / 451) Follow these main steps to reset the service light for the regular maintenance oil change on the Smart Fortwo. First, get in the vehicle and turn on …
How to reset the "Service" light on a Smart ForTwo?
How to reset the "Service" light on a Smart ForTwo?
Smart (2014-2022 / 453) Good morning, today I will guide you through the process of resetting the trip meter on your Smart ForTwo. To start, carefully enter the car. Next, t…
How to perform the service and reset the service light on the Smart Roadster
How to perform the service and reset the service light on the Smart Roadster
Smart (2003-2005 / Roadster, 452) In this guide we will see the instructions that will allow us to perform the routine maintenance check, and then reset the service light of the Smart…

    Frequently Asked Questions

    • Smart 2007-2015 - What does the Smart Service light indicate? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos