Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Mount Replacement for Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Engine mount

In this video, you will learn how to change the engine mount on your Smart Fortwo. First, remove the rear bumper to gain access; unscrew the bolts of the metal stabiliser bar and remove it. Next, detach the exhaust and disconnect it from the exhaust manifold: to access the engine mount bolts, you need to move the bracket covering the mount. Now, unscrew the five bolts of the mount: two on the chassis and three on the engine. Lift the engine with a jack and unscrew the bolts to remove the mount.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the central engine mount in the Smart ForTwo?
How to replace the central engine mount in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the central engine mount in the Smart ForTwo, a very simple and quick operation. First of all, we lift bo…
How to Replace the Engine Mount in the Smart ForTwo?
How to Replace the Engine Mount in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, you will see how to replace the engine mount in the Smart ForTwo, a very simple and quick operation. First, wait for the engine to …
Guide to Removing the Engine from the Smart Fortwo
Guide to Removing the Engine from the Smart Fortwo
Smart (1998-2007 / 450) This guide provides instructions for removing and replacing the entire engine block of the Smart Fortwo. First, lift the vehicle and begin by removin…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos