Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on Smart Fortwo 450

Model: Smart Smart 450 - Years 1998-2007
Part: Rear bumper

In this video, see how to remove the rear bumper from a Smart Fortwo 450 by following the instructions below. First, open the boot lid and remove the side screws of the bumper, as shown in the video; then remove the glass seal and take off the entire outer panel by disconnecting the connectors and cables at the back. At this point, unscrew the nuts found behind the panel and remove the screws of the cables using a Torx screwdriver; finally, unscrew the screws on the wheel arches and those on top of the bumper to remove it!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper of the Smart Fortwo
Removing the Rear Bumper of the Smart Fortwo
Smart (1998-2007 / 450) Here are step-by-step instructions to remove and replace the rear bumper of the Smart Fortwo. First, open the rear hatch and start unscrewing the fas…
How to remove the bumpers (front and rear) of the Smart Fortwo
How to remove the bumpers (front and rear) of the Smart Fortwo
Smart (1998-2007 / 450) The following steps will show us how to disassemble and remove the bumpers (front and rear) of the Smart Fortwo. Let's start by disassembling the rea…
Removing Rear Bumper from Smart
Removing Rear Bumper from Smart
Smart (1998-2007 / 450) Removing the rear bumper from a Smart Fortwo? Disassemble the piece in all its parts. Unscrew the fastening screws located in the holes of the rear b…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos