Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat of a Smart Forfour

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Seat

See other generations:
Video tutorial

Today, remove the front seats from a Smart Forfour. First, open and lift the bonnet and disconnect the two battery terminals (positive and negative).

Next, access the cabin and fold the seat forward: then unscrew the bolts located at the bottom using a socket spanner. Once done, lift the seat and disconnect the electrical connector underneath by pressing the tab (gently and without breaking it!): now you can finally remove the seat from the car, and repeat the same process for the passenger side seat!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2015 Smart Forfour
Where to Find the Fuse Box of the 2015 Smart Forfour
Smart (2014-2022 / 453) To locate the fuse box of your 2015 Smart Forfour, follow these simple steps. First, reach the driver's seat and find the small compartment located a…
Removing the Outer Door Panel of a Smart Forfour
Removing the Outer Door Panel of a Smart Forfour
Smart (1998-2007 / 450) In this tutorial, you will see the main steps and instructions to remove the outer door panel of a Smart Forfour. First, open the door and remove the…
Resetting the Tyre Pressure on a Smart ForFour
Resetting the Tyre Pressure on a Smart ForFour
Smart (2014-2022 / 453) In this brief video tutorial, we will see how to reset the tyre pressure on a Smart ForFour, registered in 2015. Start by turning on the instrument c…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos