Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the EGR valve of a Smart ForTwo

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: EGR valve

Before we can begin, we will have to open the tailgate of our Smart ForTwo, and then reach the engine compartment. So let's start by disconnecting the iron fittings connected to the EGR valve, unscrewing the bolts that secure them. After that, we will have to disconnect the relative electrical connectors. At this point, we will have to unscrew and remove the bolts that secure the valve to its base. By doing so, we will have freed the EGR valve. When we have completed this step, we will be able to remove the EGR valve of our Smart ForTwo, and we will have successfully completed the disassembly.

Posted on 19 February 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and clean the EGR valve of the Smart Fortwo
How to disassemble and clean the EGR valve of the Smart Fortwo
Smart (1998-2007 / 450) In this guide we will see the main instructions that will allow us to disassemble and clean (or replace) the EGR valve of the Smart Fortwo. First of …
How to remove the intercooler of the Smart Fortwo 0.8 CDI
How to remove the intercooler of the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) Let's see in this short video the main steps that will allow us to remove and replace the intercooler of the Smart Fortwo, with 0.8 CDI engine. First…
How do you remove the EGR valve from the Smart car?
How do you remove the EGR valve from the Smart car?
Smart (2007-2015 / 451) In order to remove the EGR valve from the Smart car, you need to open the rear hatch so that you can access the engine compartment. Underneath it, yo…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos