Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and clean the EGR valve of the Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: EGR valve

See other generations:
Video tutorial

In this guide we will see the main instructions that will allow us to disassemble and clean (or replace) the EGR valve of the Smart Fortwo. First of all, we access the rear engine compartment of the car and then proceed with the disassembly of the EGR valve; to do this, we disconnect the various pipes and the exhaust manifold attached to the valve, unscrewing all the fixing screws and disconnecting the electrical connector, as shown in the video.

Once the EGR valve is removed, you can proceed with cleaning using specific products, replacing the entire valve with a new one if damaged.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Smart ForTwo
How to Remove the EGR Valve from a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before you can start, open the rear hatch of your Smart ForTwo to access the engine compartment. Begin by disconnecting the metal fittings connected …
How to Remove the Intercooler from the Smart Fortwo 0.8 CDI
How to Remove the Intercooler from the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) In this short video, we will see the main steps to remove and replace the intercooler of the Smart Fortwo with a 0.8 CDI engine. First, access the re…
How to remove the EGR valve from the Smart?
How to remove the EGR valve from the Smart?
Smart (2007-2015 / 451) To remove the EGR valve from the Smart, open the rear hatch to access the engine compartment. Underneath, you will find the EGR valve connected direc…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos