Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Third brake light bulb replacement on Smart cars

Model: Smart Smart 453 - Years 2014-2022
Part:

Today we will show you a quick and affordable maintenance: the replacement of the central brake light bulb on a Smart car. Starting from the removal of the external casing of the spotlight, you simply need to unscrew the two small screws that fix it to the bodywork. At this point the light will come out of its seat and you can disconnect it from the connector (unscrew it slightly from the back), completely removing the light. Once you have arrived here, you can extract the bulb and insert the new one. Reinsert the bulb and connector into the spotlight and refit the spotlight by tightening the two screws.

Posted on 20 February 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light bulb of the Smart Fortwo.
How to replace the third brake light bulb of the Smart Fortwo.
Smart (2007-2015 / 451) Today we will discover the instructions that will allow us to disassemble and replace the third brake light bulb of the Smart Fortwo in simple steps.…
How do you replace the bulbs of the third stop of the Smart?
How do you replace the bulbs of the third stop of the Smart?
Smart (1998-2007 / 450) In order to replace the bulbs of the third stop of the Smart you have to loosen the screws that fix the ceiling light of the headlight. Once the scre…
Rear light bulb replacement on Smart Roadster
Rear light bulb replacement on Smart Roadster
Smart (2004-2006 / 454, Fourfour1) Open the rear door of the boot and remove the O-ring (in the area of the light) placed on the body of the same boot. Unscrew the torx t20 that fix th…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos