Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door handle on Smart Roadster

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Handle

In this video tutorial we will see how to remove the external door handle on a Smart Roadster, but also on the Smart Fortwo first series. First we open the door of our car and we go to remove the screw that we find on the plastic post, using a torx T20 screwdriver; then with a T25 torx wrench we go to unscrew the screw of the handle that we find below, as shown in the video. At this point we can remove the handle itself, disconnecting the cable mechanism; we just have to reassemble everything, applying the reverse procedure!

Posted on 8 March 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the inside handle of the Smart Roadster?
How do you replace the inside handle of the Smart Roadster?
Smart (2003-2005 / Roadster, 452) In order to replace the inside handle of the Smart Roadster you have to remove the door panel by loosening the various screws. Once the panel has bee…
How to Remove the Interior Handle of a Smart Roadster
How to Remove the Interior Handle of a Smart Roadster
Smart (1998-2007 / 450) Want to replace the right passenger side interior handle on a Smart Roadster? In this video, see how to quickly remove it from the door panel housing…
How to Remove the Outer Door Panel on a Smart Roadster
How to Remove the Outer Door Panel on a Smart Roadster
Smart (1998-2007 / 450) How to remove the outer door panel on a Smart Roadster? This video explains how to proceed. Before starting the disassembly, disconnect the battery t…

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos