Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Filter Replacement on Smart Fortwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

See other generations:
Video tutorial

First, open the engine compartment, which is located at the rear of the car. To access it, lift the upper glass of the boot, then lower it and lift the lower cover. Unscrew the fastener of the engine compartment cover and remove it. Using a flathead screwdriver, unscrew the screws holding the intake duct clamp and disconnect it. Remove the air filter box cover by simply unclipping it and replace the air filter.

Refit the compartment cover, reconnect the duct, and close the clamp. Good luck!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Smart Fortwo 451
How to Replace the Air Filter on a Smart Fortwo 451
Smart (2007-2015 / 451) In this new mini guide dedicated to your Smart Fortwo 451 (2012 model), discover how to correctly replace the air filter without needing a profession…
How to Replace the Cabin Filter in the Smart Fortwo 450?
How to Replace the Cabin Filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) Replacing the cabin filter in the Smart Fortwo 451 takes about 20 minutes. The filter is located inside the cabin, near the accelerator pedal. To cha…
How to Replace the Cabin Air Filter on a Smart ForTwo
How to Replace the Cabin Air Filter on a Smart ForTwo
Smart (2007-2015 / 451) Before you start, enter the cabin of your Smart ForTwo. Begin by unclipping the clips that secure the cabin air filter cover, located near the driver…

Replacing the Gear Knob on the Renault Espace

The following steps will show you how to remove and replace the gear knob of the manual gearbox on the Renault Espace. First, get in the vehicle and start by removing the small upper cover of the knob; to remove it, simply pull the gear knob upwards with force to detach it from the lever, as shown in the video. At this point, remove and replace the gear gaiter if necessary, installing the new one; finally, insert the new gear knob, securing it properly onto the lever (ensure there is no play between the lever and the knob).

Watch the video!


by ScegliAuto

More videos