Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Smart window regulator?

Model: Smart Smart 450 - Years 1998-2007
Part: Checks and maintenance

In order to replace the Smart window lifter, you must first remove the outer door panel. To do this, you will need to remove bolts from the inside of the door, which are located at the outside rearview mirror and behind the plastic cover of the outside handle. Once these screws have been removed, it will be possible to pry the outer panel off with an object. Now it will be necessary to block the glass with an object, so as to be able to unscrew the bolts that secure the window regulator. This can now be removed and replaced.

Posted on 22 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the window lift mechanism on the Smart 450?
How do you replace the window lift mechanism on the Smart 450?
Smart (1998-2007 / 450) In order to replace the window lift mechanism of the Smart 450, you need to loosen the screws that secure the outer door panel: these are located in …
How do you replace the Smart thermostat?
How do you replace the Smart thermostat?
Smart (2007-2015 / 451) To replace the Smart thermostat, you need to open the engine compartment and locate the thermostat, which is located immediately under the windshield…
How to replace the power window button on a Smart ForTwo
How to replace the power window button on a Smart ForTwo
Smart (2007-2015 / 451) Before starting, we will have to sit in the driver's seat of our Smart ForTwo. So let's start by disengaging and removing the plastic located around …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Remove the Tailgate Handle on a Nissan Qashqai

Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, then unscrew the screws on the plastic trim of the tailgate using a screwdriver (remove the plastic rivets). Detach the plastic trim from the tailgate, unscrew the securing bolts of the external handle with a screwdriver. Finally, remove the tailgate handle by hand. Take the new part and disassemble the number plate light. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos