Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Smart 450?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Instrument cluster

See other generations:
Video tutorial

To remove the instrument cluster from the Smart 450, loosen the three screws located under the steering column. Once the three screws are loosened and removed, grasp the plastic cover that surrounds the instrument cluster and lift it, also removing the instrument cluster connected to it. To completely remove it, you will also need to disconnect the connector attached to its rear.

Once the old instrument cluster is removed, you can insert the new spare part and install it.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the Smart Fortwo 450
Where to Find the OBD Port of the Smart Fortwo 450
Smart (1998-2007 / 450) To locate the OBD port inside the cabin of your Smart Fortwo 450, you only need a few seconds. Follow the steps below in the order described. First, …
How to Replace the Air Filter on the Smart 450
How to Replace the Air Filter on the Smart 450
Smart (1998-2007 / 450) If you want to avoid overheating or loss of power in your Smart 450, you must periodically replace the air filter. Below, we will discover how to per…
How to Reset the Service Light on Smart 450?
How to Reset the Service Light on Smart 450?
Smart (1998-2007 / 450) To completely clear the Service light displayed on the Smart 450's instrument panel, hold down the button located on the left side of the instrument …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos