Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel of a Smart 451

Model: Smart Smart 451 - Years 2007-2015
Part: Steering wheel

Today we are going to disassemble the steering wheel of a Smart 451, an operation that requires a little patience, time and delicacy, follow all the steps I am about to describe. Let's start unscrewing the screw located in the rear part of the steering wheel, we will notice how in the video a small hole and with a special key we will go to unscrew it. After unscrewing the screw, let's remove the rear plastic on the steering wheel and extract it. We just have to disconnect the connectors using a bit of caution, we are now ready to extract our steering wheel to the outside. Once disassembled to reassemble it, it will be enough for us to carry out all the maneuvers in reverse. Our video description ends here, see you next time.

Posted on 10 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the steering wheel of the Smart 451?
How do you remove the steering wheel of the Smart 451?
Smart (2007-2015 / 451) In order to remove the steering wheel of the Smart 451, you need to loosen the bolts located at the lower rear part of the steering wheel so that the…
How do I remove the Smart 451's steering wheel airbag?
How do I remove the Smart 451's steering wheel airbag?
Smart (2007-2015 / 451) In order to remove the Smart 451 steering wheel airbag, you need to remove the plastic covers located in the lower part of the steering column: in th…
How to replace the rear window pistons in the Smart 451
How to replace the rear window pistons in the Smart 451
Smart (2007-2015 / 451) Contrary to what one might think, the removal and installation of the rear window pistons of the Smart 451 are not complex operations. In fact, you c…

Other guides you may be interested in

Removing the Drive Shaft on a Fiat Panda

Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the securing bolts on either side of the drive shaft (remove the bolts around the plates) where it is situated. Once the part is removed, take it out of the vehicle (replace it with a new drive shaft). Finally, refit the new drive shaft (connect it on both sides) and tighten the appropriate bolts. Lower the car and test its proper functioning.

Watch the video!


by ScegliAuto

More videos