Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery of a first series Smart.

Model: Smart Smart 450 - Years 1998-2007
Part: Key

To replace the battery of the remote control of a first series Smart (Smart 450) it is necessary to carry out some simple steps. To start, as shown in the video at minute 0: 10, we have to pry with a screwdriver in the gap between the two parts of the remote control shell; by doing so, we will be able to open it. Once opened we will find the support of the circuits; the battery holder is installed on it. We remove the old battery and replace it with the new one. At the end of the operation, reinsert the circuits and close the two plastic parts of the remote control with a light pressure.

Posted on 14 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery on the Smart Fortwo 450
How to change the battery on the Smart Fortwo 450
Smart (1998-2007 / 450) In today's video tutorial we will see how to disassemble and replace the battery on the Smart Fortwo 450, first series, by following the instructions…
Fuse replacement on Smart Fortwo first series
Fuse replacement on Smart Fortwo first series
Smart (1998-2007 / 450) Let's see the replacement of fuses on Smart Fortwo first series. We open the driver's side door, remove the trim placed under the dashboard (under th…
How to replace the battery of the Smart 451 key.
How to replace the battery of the Smart 451 key.
Smart (2007-2015 / 451) If the key of your Smart 451 suddenly stopped working, it is very likely that the small button battery inside it has completely discharged. In the fo…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - How to start the Smart without the remote control? Read answer

How to Remove the Front Bumper of a Subaru Impreza

Do you want to replace the front bumper of a Subaru Impreza? Follow this guide. Lift the bonnet and secure it. Using a socket wrench, unscrew the fastening bolts of the bumper located at the top as shown in the video. Once this is done, unscrew the screws of the splash guard located near the wheels, and finally remove the plastic pins/rivets at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter.

Watch the video!


by ScegliAuto

More videos