Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuses on Smart Fortwo First Series

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuse box

See other generations:
Video tutorial

Let's look at replacing the fuses on the Smart Fortwo first series. Open the driver's side door, and use a plastic lever to remove the cover under the dashboard (below the steering wheel), then use pliers to pull out the damaged fuses from the compartment.

Once this is done, insert the new fuses into the appropriate slots in the compartment. Finally, close the fuse inspection box with the cover (if present).

Test the correct operation of the vehicle by turning on the instrument cluster with the ignition key.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Where are the Fuse Boxes on a Smart Fortwo 450?
Where are the Fuse Boxes on a Smart Fortwo 450?
Smart (1998-2007 / 450) In this guide, we will look at the location of the fuse boxes on a first series Smart Fortwo 450, along with the fuse diagram. First, locate the inte…
Replacing the Front Headlight Bulb on a Smart Fortwo 450
Replacing the Front Headlight Bulb on a Smart Fortwo 450
Smart (1998-2007 / 450) In this short video, you will see the necessary instructions for disassembling and replacing the front headlight bulb on the first generation Smart F…
Where is the OBD port of the Smart Fortwo 450?
Where is the OBD port of the Smart Fortwo 450?
Smart (1998-2007 / 450) If you still do not know where the OBD port of your Smart Fortwo 450 (1998-2007) is located, read this guide carefully and follow the step-by-step in…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos