Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Smart Fortwo 450

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Battery

See other generations:
Video tutorial

In today's video tutorial, you will learn how to remove and replace the battery on the Smart Fortwo 450, first series, by following the instructions below. First, get inside the vehicle on the passenger side and start by removing the carpet covering the floor; then remove the polystyrene panel to access the battery, as shown in the video.

At this point, disconnect the two battery terminals (positive and negative) by unscrewing the nuts with a 10 mm spanner; simply remove it and replace it with the new one, applying the reverse procedure!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Change the Battery of the Smart Fortwo
How to Change the Battery of the Smart Fortwo
Smart (1998-2007 / 450) Is the battery of your Smart Fortwo due for replacement? Here’s how to change it. The battery is located under the dashboard (passenger side). Lift t…
Where is the OBD port of the Smart Fortwo 450?
Where is the OBD port of the Smart Fortwo 450?
Smart (1998-2007 / 450) If you still do not know where the OBD port of your Smart Fortwo 450 (1998-2007) is located, read this guide carefully and follow the step-by-step in…
How to Change the Battery on a Smart Fortwo
How to Change the Battery on a Smart Fortwo
Smart (1998-2007 / 450) Today's guide will illustrate the steps to remove and replace the battery on a Smart Fortwo. First, open the front passenger door and start removing …

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the battery on the Smart 453? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos