Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo 453 rear view camera installation

Model: Smart Smart 453 - Years 2014-2022

In today's video we will see the instructions that will allow us to disassemble the rear view camera on a Smart Fortwo 453. First of all, let's get the rear view camera compatible with our car model; then we go to to open the tailgate of the trunk and we unhook the rear panel, in order to fix our rear camera. At this point it is important to go through all the cables until they reach the front display control unit, where it will be possible to check the rear view; the video illustrates the possible points to be able to pass all the wiring!

Posted on 10 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to install the rear camera of the Smart Fortwo
How to install the rear camera of the Smart Fortwo
Smart (2014-2022 / 453) To install the rearview camera in the Smart Fortwo, we start by making the connections behind the radio by installing the video connections of the re…
Removing the outer cover of the rear door panel Smart Fortwo 453
Removing the outer cover of the rear door panel Smart Fortwo 453
Smart (2014-2022 / 453) In this short video tutorial we will see the main steps on how to remove the rear panel of the boot lid of a Smart Fortwo 453. First we open the glas…
Removing the rear light on Smart Fortwo 453
Removing the rear light on Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial we will see how to disassemble the rear light on a Smart Fortwo 453, following these simple steps. First of all we open the bo…

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos