Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Smart 453.

Model: Smart Smart 453 - Years 2014-2022
Part: Service warning light

In this guide we will see how to reset the service warning light in a Smart 453. When the message indicating the need for a check appears on our display, we will have to press the OK button located on the steering wheel, on the left. We will have to keep it pressed until we see the service message that starts flashing. At that point we will have to continue holding the OK button. After a few seconds, the message will stop flashing and the message will appear indicating that a new check has been preset once the next 20,000 kilometers have been carried out. At this point we can release the button and the operation will be completed.

Posted on 13 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Smart Fortwo 453
How to reset the service light on the Smart Fortwo 453
Smart (2014-2022 / 453) Let's find out in this video tutorial how to reset the oil change routine maintenance service light on a Smart Fortwo 453, third series. First of all…
How do you reset the Service light on the Smart 453?
How do you reset the Service light on the Smart 453?
Smart (2014-2022 / 453) The operation to reset the Service light on the Smart 453 is performed by inserting the key into the ignition and turning it to turn on the instrumen…
How do you reset the Service light on the Smart 453?
How do you reset the Service light on the Smart 453?
Smart (2014-2022 / 453) The procedure for resetting the Service light on the Smart 453 involves inserting the key into the ignition switch and turning it to turn on the inst…

Other guides you may be interested in

How to Remove the Tailgate Trim of a Mazda CX-5

How to remove the tailgate trim of a Mazda CX-5? Follow these steps. Open and lift the tailgate of your car. Using a screwdriver, unscrew the securing screws located in the plastic panel (where the handles are). Remove the plastic trim from the tailgate of the boot (use a plastic or metal lever to assist). Disconnect any electrical connectors attached to the trim. Perform maintenance inside the tailgate. Refit the trims and associated parts in reverse order.

Watch the video!


by ScegliAuto

More videos