Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Smart

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
This video is currently unavailable

To remove the radio from this car model, perhaps to install a more powerful one, follow the instructions below along with the video images for proper disassembly. First, obtain a plastic lever to detach and pry on the control group located just below the radio.

Below it, you will find a screw that needs to be removed to take off the radio's trim. There are two screws on either side of the radio that must also be removed.

Be careful to disconnect the terminals and connectors located at the back. Then, take the new radio and correctly carry out the rear wiring before reassembling all components in reverse order.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Remove the Radio from a Smart Fortwo
Remove the Radio from a Smart Fortwo
Smart (1998-2007 / 450) Want to remove the radio from a Smart Fortwo? Remove the radio and install a new one. Use the original or aftermarket metal keys to remove the radio …
How to disassemble and replace the radio of the Smart Fortwo
How to disassemble and replace the radio of the Smart Fortwo
Smart (1998-2007 / 450) Today's instructions will show us how to disassemble and replace the stock radio of the Smart Fortwo. First, we get into the car and start removing t…
How to Remove the Stereo on Smart Fortwo
How to Remove the Stereo on Smart Fortwo
Smart (2014-2022 / 453) How to remove the original radio on a Smart Fortwo? Follow these steps: turn off the radio, then use levers (plastic or metal) to detach the car ster…

    Frequently Asked Questions

    • Smart 2007-2015 - How to unlock the radio of the Smart? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos