Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Battery

Today's guide will show us the steps that will allow us to disassemble and replace the battery of the Smart Fortwo. First we open the front door, on the passenger side, and begin to remove the carpet cover and the floor mat; we will find below the battery, as shown in the video. At this point we unscrew the screws of the central fixing bracket, subsequently disconnecting both battery terminals (positive and negative pole); then we remove and replace the battery with the new one, of the right type and having the same amperage, making the connection!

Posted on 18 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of the Smart fortwo
How to change the battery of the Smart fortwo
Smart (1998-2007 / 450) Is the battery of the Smart Fortwo to be replaced? Let's see how it changes. The battery is located under the dashboard (passenger side). We lift the…
Changing the battery in a Smart Fortwo
Changing the battery in a Smart Fortwo
Smart (2007-2015 / 451) Do we want to remove the battery of the Smart Fortwo? Let's see the disassembly of the damaged battery. We find the Smart battery in the passenger co…
How to change the battery on the Smart Fortwo 450
How to change the battery on the Smart Fortwo 450
Smart (1998-2007 / 450) In today's video tutorial we will see how to disassemble and replace the battery on the Smart Fortwo 450, first series, by following the instructions…

    Frequently Asked Questions

    • Smart 2007-2015 - How many Ah should the battery of the Smart 451 be? Read answer
    • Smart 2007-2015 - Where is the Smart battery located? Read answer

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos