Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers in the Smart ForTwo?

Model: Smart Smart 450 - Years 1998-2007
Part: Speaker

As we can see in this tutorial, replacing the speakers in the Smart ForTwo is a very quick and easy operation. The first thing to do, in order to operate in complete safety, is to temporarily disconnect the negative terminal of the battery located under the passenger seat. Once this is done, we remove the cover under the glove box, locate the first speaker and, with a Torx T20 wrench, unscrew the relative screws. At this point we can disconnect the connector, mount the spare following the reverse procedure and repeat everything for the opposite side, if necessary.

Posted on 21 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to install speakers on the Smart Fortwo
How to install speakers on the Smart Fortwo
Smart (1998-2007 / 450) Today we will discover the main instructions that will allow us to install additional speakers on the Smart Fortwo. First of all, we need to find spe…
How to install the front door speakers of the Smart Fortwo
How to install the front door speakers of the Smart Fortwo
Smart (2007-2015 / 451) In this guide we will see the instructions that will allow us to install the front door speakers of the Smart Fortwo. First of all, we open the front…
How to replace the speakers of the Smart Fortwo
How to replace the speakers of the Smart Fortwo
Smart (2007-2015 / 451) Today we will see, in this short and simple guide, the necessary instructions to disassemble and replace the front speakers of the Smart Fortwo. Firs…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos