Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Hood of the Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Convertible top

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and reinstall the hood of the Smart Fortwo by following these simple and quick steps. First, open the front door and start retracting the hood using the internal button; then press down on the hood while opening the rear hatch to position it inside, as shown in the video.

Now, remove the upper pillars to fully expose the vehicle; then proceed with the installation of the hood by fitting the plastic pillars and securing the hood onto the guides, before pressing the button to close it!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Remove the Roof Motor of a Smart ForTwo
How to Remove the Roof Motor of a Smart ForTwo
Smart (1998-2007 / 450) Before you can start, open the boot of your Smart ForTwo. Begin by disconnecting the electrical connectors attached to the motors that operate the ro…
How to Remove the Roof of a Smart Fortwo
How to Remove the Roof of a Smart Fortwo
Smart (2007-2015 / 451) How to remove the roof of a Smart Fortwo? Follow these steps: use a screwdriver to remove the side plastic covers located at the edges of the roof, t…
How to Open the Roof of the Smart Fortwo
Smart (2007-2015 / 451) Let's briefly review the instructions to open and close the electric roof of the Smart Fortwo in simple and quick steps. First, get in the vehicle an…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos