Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel of the Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Wheel

If you need to use the spare wheel of your Smart but do not know where it is, all you have to do is read carefully the various information described in our new mini guide. First make sure you park your car on a level surface and preferably turn off the vehicle completely. Go to the rear and fully open the hood. Remove the top panel and immediately below you will finally have access to the spare wheel. Furthermore, under the protection panel you will find the assembly kit that will facilitate the various operations.

Posted on 31 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wheel of the Smart Fortwo 453
How to replace the wheel of the Smart Fortwo 453
Smart (2014-2022 / 453) Let's see in this short video the main guide to disassemble and replace the front wheel, but also applies to the rear wheel, of the Smart Fortwo 453.…
How do you replace the rear wheel bearing of the Smart Fortwo?
How do you replace the rear wheel bearing of the Smart Fortwo?
Smart (1998-2007 / 450) In order to replace the rear wheel bearing of the Smart Fortwo, you need to lift the car using a jack and then loosen the bolts that secure the rear …
Where is the tire repair kit on the Smart ForTwo?
Where is the tire repair kit on the Smart ForTwo?
Smart (2007-2015 / 451) As can easily be understood due to its small size, the Smart ForTwo does not have a spare wheel or the various tools for a possible replacement. Inst…

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the Smart spare wheel located? Read answer

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos