Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car radio replacement on the Smart 453

Model: Smart Smart 453 - Years 2014-2022
Part: Car stereo

In order to replace the car radio it is necessary to follow the following procedure: using a pointed object unclip the front panel of the car radio on all four sides and disconnect the rear electrical terminal. There are four screws on the two sides of the car radio which must be unscrewed. At this point, remove the display and disconnect the power supply terminals behind it. At the bottom of the housing there are screws which must be unscrewed to extract the radio door box. Once all the screws have been unscrewed, it is possible to extract the box by pulling it towards you. Also remove the dashboard panel by levering it gently. In this way you have access to the car radio which is fixed with four screws which must be removed. Then remove the car radio and disconnect the terminals located in the rear area. Position the new car radio and repeat all the activities described above backwards to reassemble everything.

Posted on 28 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the car stereo in the Smart car?
How do you replace the car stereo in the Smart car?
Smart (2014-2022 / 453) The technological upgrade of a car, such as the Smart, whether it is the Smart 453 or other models, can be done not only by yourself, but even with a…
How do you remove the dashboard of the Smart 453?
How do you remove the dashboard of the Smart 453?
Smart (2014-2022 / 453) In order to disassemble the dashboard of the Smart 453, you need to remove the cover from the part near the driver's door and loosen the screws under…
Where is the OBD port located on the Smart 453 2015?
Where is the OBD port located on the Smart 453 2015?
Smart (2014-2022 / 453) In this new mini guide aimed at all of you who own a Smart 453 (year 2015), we will guide you step by step in locating the OBD port inside the cabin.…

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos