Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Exhaust of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Exhaust muffler

Below are the main steps on how to remove and replace the exhaust of the Smart Fortwo, following the instructions provided. First, open the rear hatch of the boot and start by removing the rear bumper, unscrewing the fixing screws found on the sides. Then, lift the vehicle and disconnect the exhaust manifold from the exhaust, unscrewing the nuts and also removing the catalytic converter, as shown in the video. Now, install the new exhaust system, securing it properly to the manifold and the vehicle's chassis!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Exhaust of the Smart Fortwo
Smart (2007-2015 / 451) Let's briefly go through the steps needed to remove and replace the exhaust of the Smart Fortwo. First, move to the rear of the vehicle, open the boo…
Replacing the Battery on a Smart Fortwo 451
Replacing the Battery on a Smart Fortwo 451
Smart (2007-2015 / 451) In this video, you will see the steps to dismantle and replace the engine battery on a Smart Fortwo 451. First, locate the battery at the rear; then …
Installing Rear Camera on Smart Fortwo 453
Installing Rear Camera on Smart Fortwo 453
Smart (2014-2022 / 453) In today's video, you will see the instructions for removing the rear camera on a Smart Fortwo 453. First, obtain a compatible rear camera for your c…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos