Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Panel on a Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

How do you remove the external door panel on a Smart Fortwo? Here’s how to proceed: before starting the disassembly, disconnect the battery terminals located in the front engine compartment. Use a screwdriver to unscrew the securing screws on the internal door panel, then detach the rubber seal next to the glass.

Using a lever, release all the clips of the door panel by prying around the entire perimeter of the door. Finally, pull the panel away with your hands.

Reassemble everything in reverse order.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Removing the Outer Door Panel of the Smart Fortwo
Removing the Outer Door Panel of the Smart Fortwo
Smart (1998-2007 / 450) In this video tutorial, follow the instructions on how to remove and replace the outer door panel of the front door of the Smart Fortwo. First, move …
Removing the Door Panel of the Smart Fortwo
Removing the Door Panel of the Smart Fortwo
Smart (1998-2007 / 450) Today, you will see the instructions that will allow you to remove the inner and outer door panel of the front door of the Smart Fortwo. First, open …
Removing the Inner and Outer Door Panel of the Smart Fortwo
Removing the Inner and Outer Door Panel of the Smart Fortwo
Smart (1998-2007 / 450) The following steps will show you how to remove the inner and outer door panel of the Smart Fortwo. First, open the front door and start by removing …

    Frequently Asked Questions

    • Smart 2014-2022 - How to remove the door panel in the Smart Fortwo? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos