Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check Fluid Levels on the Smart?

Model: Smart Smart 451 - Years 2007-2015

If you need to check the fluid levels for the cooling system, brake fluid, and windscreen washer fluid on this model of car, the following description provides all the instructions and steps to follow for these checks, and you can also refer to the images in the video. First, remove the cover from the left air intake located between the engine bonnet and the windscreen. Underneath, you will find another grille that can be removed by pulling it towards you, giving access to the coolant reservoir located just below. Proceed to unscrew the cap and top up the fluid if necessary. Next, remove the other grille located between the windscreen and the engine bonnet, where you will find the brake fluid reservoir and the windscreen washer fluid reservoir.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you repair the Smart's convertible top?
How do you repair the Smart's convertible top?
Smart (2007-2015 / 451) In order to repair the Smart's convertible top, first you need to check that the mechanism controlling its movement does not have any damages: you ne…
How to Check Engine Oil in the Smart
How to Check Engine Oil in the Smart
Smart (1998-2007 / 450) In today's video, you will learn how to check the oil level in the Smart Fortwo. First, remember to perform this operation with the engine cold for a…
Replacement of the front headlight bulbs of the Smart 450.
Replacement of the front headlight bulbs of the Smart 450.
Smart (1998-2007 / 450) To replace the front headlight bulbs of the Smart 450, we unscrew the five Torx screws found in the passenger door frame, remove the plastic triangle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos