Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove the front bumper of the Smart Fortwo.

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Front bumper
Operation: How to remove the front bumper of the Smart Fortwo.

Removing the front bumper of the Smart Fortwo model 451 is a very simple operation that can be done independently thanks to our video tutorial. We begin the removal process by removing the sealing panel located in the lower side area of the Smart. To do this, simply use a lever tool to detach the fastening clips. We continue the procedure by removing the front hood. Then, using a torx key, we remove the central screw that holds the central belt in place. With a T25, we remove the side bolts. As shown in the video, remove the side screws near the exterior mirror and remove the clips of the lower bumper. Disconnect the various connectors and extract the bumper from its seat.


Posted on 26 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos