Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the seats of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Seat

Removing the seats of the Smart Fortwo model 451 is very simple. Today, thanks to our video tutorial, we will explain how to do it. We begin the process of removing the seats by pushing them forward and then all the way back, in order to remove the Torx screws that secure the seat bars to the car's flooring. Once the screws are removed, we can lift the seat to disconnect the airbag. It is important to perform this operation only after disconnecting the battery to avoid accidents. Once the connector is removed, we can extract the first seat. We perform the same operation for the other seat.

Posted on 26 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the protective adhesive layer from the panoramic roof of the Smart Fortwo
How to remove the protective adhesive layer from the panoramic roof of the Smart Fortwo
Smart (2003-2005 / Roadster, 452) A thin layer of adhesive is applied to the entire surface of the panoramic roof of the 2004 Smart Fortwo, which constantly protects the bodywork from…
How to remove the front bumper of a Smart ForTwo
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the …
How to change the battery on the Smart Fortwo 450
How to change the battery on the Smart Fortwo 450
Smart (1998-2007 / 450) In today's video tutorial we will see how to disassemble and replace the battery on the Smart Fortwo 450, first series, by following the instructions…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos