Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
450
- Years 1998-2007 In this video tutorial, we can see how it is possible to disassemble the passenger side seat in a first-generation Smart Fortwo, which was produced from 1998 to 2007. The first thing to do is to prepare the necessary materials for seat disassembly: a Torx T45 wrench and a 17mm wrench. We need to remove the eight bolts that hold the seat fixed to the frame (4 for each side); the rear bolts are positioned in the same spots for both seats, while the front ones are positioned slightly differently. Unscrew the bolts with a Torx 45 wrench. After completing this step, we need to remove the belt by simply sliding it out of the slot located above the seat and removing the bolt located below it with a 17mm wrench. Now we can remove the seat from its position.
Posted on 3 July 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |