Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How do you remove the door panel of the Smart 451?

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Door panel
Operation: How do you remove the door panel of the Smart 451?

The removal of the door panel of the Smart 451 is done by first detaching the outer panel of the door: this way it will be possible to have access to the clips that secure the panel from the outside. These clips will need to be loosened in order to detach the lower part of the inner panel; it will now be possible to proceed by levering with an object and removing the handrail molding, so that the underlying screws can be loosened. After removing these screws, the panel can be detached so that it can be replaced with a new replacement piece.


Posted on 12 September 2023 by ScegliAuto



How do you remove the door panel of the Smart 451?
Smart (2007-2015 / 451) The procedure for removing the door panel on the Smart 451 involves first removing the outer panel of the door: this will allow access to the clips u
How do you remove the door panel of the Smart 451?
Smart (2007-2015 / 451) In order to remove the door panel on the Smart 451, you first need to detach the outer door panel: this will allow you to access the clips that secur
How do I remove the outer door panel of the Smart 451?
Smart (2007-2015 / 451) In order to replace the outer door panel of the Smart 451, you need to loosen the screws that secure the rear-view mirror from the inside of the door

    Frequently Asked Questions

    • Smart 2014-2022 - How to remove the door panel in the Smart Fortwo? Read Answer
    • Smart 1998-2007 - How do I remove the outer door panel of the Smart 450? Read Answer
    • Smart 2007-2015 - How do I remove the door panel from the Smart 451? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos