Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
450
- Years 1998-2007 In order to replace the interior handle of the Smart 450, you need to pry with an object to detach the triangular cover on the inside of the mirror. Once this is removed, you can also detach the panel on the outside, in order to access the fastening screws of the handle mechanism. These screws need to be loosened so that the interior handle can be removed and disconnected. At this point, you can connect the new replacement piece and then install the appropriate door panels.
Posted on 15 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |