Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the engine oil in the Smart ForTwo?

Model: Smart Smart 450 - Years 1998-2007
Part: Engine oil

In this tutorial, we can see how to top up the engine oil in the Smart ForTwo, an extremely simple and quick operation. First of all, we wait for the engine itself to be sufficiently cold, then we open the rear door, lift the bottom cover, and remove the panel. Next, we locate the yellow ring, grab it, remove the dipstick from its housing, clean it, and insert it again. At this point, all that remains is to check the oil level in the system and add the necessary amount through the appropriate hole, located next to the dipstick itself.

Posted on 31 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How to top up the washer fluid on Smart Fortwo 453
How to top up the washer fluid on Smart Fortwo 453
Smart (2014-2022 / 453) Let's see in this video how to top up the washer fluid on a Smart Fortwo 453 third series, but also on previous models. First of all it is necessary …
How to top up the washer fluid on a Smart ForTwo
How to top up the washer fluid on a Smart ForTwo
Smart (2007-2015 / 451) Before starting, we will have to get out of the cockpit of our Smart ForTwo, and then head towards the front of the car. So let's start by disengagin…
How to replace the oil in the Smart ForTwo?
How to replace the oil in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the oil in the Smart ForTwo, a very simple operation. Before proceeding, let's wait for the engine to coo…

Other guides you may be interested in

How to Replace the Front Bumper of an Opel Corsa

The process is straightforward and quick; just follow this simple guide. Start by unscrewing the screws located under the wheel arch, specifically those facing the front bumper, on both sides. Next, remove the screws securing the bumper to the lower panel of your vehicle. Lift the bonnet and remove the screws located on the top of the bumper. Once these screws are removed, you can easily pull out the bumper and disconnect the plugs at the back.

Watch the video!


by ScegliAuto

More videos