Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the automatic transmission of the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: Warning light – error code

If the Smart's instrument panel shows a flashing letter N, it means that there is a malfunction with the automatic transmission. To temporarily resolve this issue, you can engage a gear when the engine is off. Then, with the gear engaged and the ignition key in position two, you will need to push the car so that it can start. Once the clutch is released during the pushing operation, the car will start. However, it is important to promptly go to a workshop to perform a diagnosis and identify the cause of the anomaly.

Posted on 16 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the automatic transmission of the Smart car?
How do you reset the automatic transmission of the Smart car?
Smart (2007-2015 / 451) In order to reset the automatic transmission of the Smart, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be fou…
How do you reset the automatic gearbox of the Smart Brabus?
How do you reset the automatic gearbox of the Smart Brabus?
Smart (2007-2015 / 451) In order to reset the automatic transmission of the Smart Brabus, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can…
How do you reset the automatic transmission of the Smart car?
How do you reset the automatic transmission of the Smart car?
Smart (2007-2015 / 451) On the Smart Fortwo, when the flashing letter N appears on the instrument panel, it means that there is a problem with the automatic transmission. To…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - What does error code P1700 indicate on a Smart Fortwo? Read answer
    • Smart 2007-2015 - What does the yellow triangle light with exclamation mark on a Smart ForTwo mean? Read answer

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos