Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Smart 453.

Model: Smart Smart 453 - Years 2014-2022
Part: Tail light bulb

If we notice that one of the rear headlight bulbs of the Smart car is burnt out, we should replace them as soon as possible in order to drive safely and avoid fines. To replace them, we open the rear window and the door, position ourselves in front of the headlight that contains the bulb to be replaced. Inside the trunk, on the side panel, we will find a panel that we will open by acting on the fastening clip, remove the inner lining and we will have access to the plates where the bulbs are housed. After replacing the burnt out ones, we put back the lining and close the panel.

Posted on 8 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Smart 453?
How to Remove the Rear Light on a Smart 453?
Smart (2014-2022 / 453) To remove the rear light on a Smart 453, lift the tailgate to access the small side screws that secure the light within its housing. These screws mus…
Removing the Rear Light on Smart Fortwo 453
Removing the Rear Light on Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial, we will see how to remove the rear light on a Smart Fortwo 453 by following these simple steps. First, open the boot lid and …
How to Replace the Front Headlamp Bulb on the Smart 453?
How to Replace the Front Headlamp Bulb on the Smart 453?
Smart (2014-2022 / 453) To replace the headlamp bulb on the Smart 453, pull the two clips located on either side of the car's grille to lift the front bonnet. Once removed, …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos